Firebacks and concrete fire products from Dineen Refractories, Ireland.
Dineen Refractories Fire Products Title Dineen Refractories Hearth Products Ireland
About Dineen Refractories and Fire Products Ireland
Fireback, Grates and Frets from Dineen, Ireland About Dineen Refractories for Flue Liners and Chimneys Ireland
About Dineen Refractories and Fire Products Ireland
Flue Liners and Chimney Cans from Dineen Refractories Ireland
Fire Backs and Flue Cheeks from Dineen Refractories Ireland
Dineen Refractories Grates, Frets and Hearths, Ireland
Dineen Refractories Grates, Frets and Hearths, Ireland
Cooker Bricks and Range Parts, Ireland
Terra Cotta Irish Floor Tiles from Dineen Refractories Ireland
Cement and Products for fires and Hearths, Ireland
Contact Dineen Refractories for Concrete Fire Products Ireland
 

As well as standard firebacks, Dineen Refractories also manufacture and distribute specialist firebacks for different purposes, as well as Flue Cheeks, Fuel Savers and other Off-Standard Firebacks.
Click Here for Fireback fitting instructions

Cutout Firebacks
Cutout FireBacks, Ireland

The cutout firebacks are manufactured identical to the standard firebacks except for a hollow section which is removed from the fire area at the back. A steel or copper boiler is then inserted in this slot an is used for heating.
These Cutout Firebacks are available in 16" Medium or High
18" Medium or High

50/50 Firebacks
50/50 FireBacks, Ireland

The 50/50 firebacks are also identical to the standard firebacks except the actual fireback is manufactured in two sections. When replacing firebacks, these are very easy to install and they also suit heat expansion a lot better than the standard fireback as the main heat in any fire is always in the lower area. It is vital when these are fitted that the two sectios are not joined.
These 50/50 Firebacks are available in
16" Medium or High
18" Medium or High
20" High

Rollback Firebacks
Rollback FireBacks, Ireland

The Rollback is an old design with deep grooves on the back and sides of the fire area. The reason for thses grooves is to delay the flames as they go up the chimney. Also, due to it's bulk and density it radiates greater heat therefore contributing to the efficiency of the fire.
These Rollback Firebacks are available in 16" or 18"


Industrial Products
Flue Cheeks
ProductCode
Ace Flue Cheeks A04
Bilberry Flue Cheeks High Grade BFCH
Old Type Bilberry High Grade BFC2H
Bell Flue Cheek BFC3
Large Bilberry Flue Cheeks BFC4
Baxi Flue Cheeks BFC5
Bilberry Back Brick BFC6
Bath Flue Cheeks BFC7
Cora Flue Cheeks CFC1
Dauntless Flue Cheeks DFC1
Dauntless Flue Cheeks High Grade DFCH
Epic Flue Cheeks EFC1
Epic Flue Cheeks High Grade EFCH
Parkray Flue Cheeks P06
Back to Top
Fuel Savers
ProductCode
No.2/3 Side Fuel Savers FS03
No. 3 Side Fuel Saver High Grade FSH03
No. 4 Side Fuel Savers FS04
No. 5 Side Fuel Savers FS05
No. 8 Side Fuel Savers FS08
No. 9 Side Fuel Savers FS09
No. 10 Side Fuel Savers FS1O
No. 10 Back Fuel Saver High Grade FSH1O
No. 11 Side Fuel Savers FS11
No. 12 Side Fuel Savers FS12
No. 12 Back Fuel Saver High Grade FSH12
No. 14 Side Fuel Savers FS14
No. 14 Back Fuel Saver High Grade FSH14
16" Glow Brick G01
18" Glow Brick G02
Back to Top
Off-Standard Firebacks
ProductCode
16" Heat Shields PO1
18" Heat Shields P02
16"/18" Baxi Fireback BFB1
20"/22"Baxi Fireback BFB2
16" Sunken Fireback FBS16
18"' Sunken Fireback FBS18
16" Med Fireback 24" High FM16/24
16" Med fireback 8" Deep FM16/8
18" Med Fireback 24" High FM18/24
Back to Top

Click Here for fireback fitting instructions

Firebacks, Tiles and Flueliners Ireland   Back to Firebacks
[Home] [About Us] [Flue Liners and Pots] [Grates & Frets]
[Bricks] [Cooker Parts] [Floor Tiles] [Industrial Products] [Contact Us]